Magic Marker
05-24-2008, 08:33 PM
Since I don't have a garage, I have to detail when just the right weather permits. Well today was the day. Slight overcast, cool and dry. I only had 3 hours to complete before the sun went down so I did the abridged version as the car wasn't that dirty.
First and foremost for a stress free and easy clean up.....tape the car! By the way, you can use normal 3M painters tape, but on the rubber gaskets, use the low adhesive 3M painters tape. For some reason, there is a little residue left behind.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0174.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0175.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0178.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0179.jpg
Then I ran over it with Meguiars M80 paint cleaner. I typically use a clay bar prior to this, but I was tight on time and the B9 wasn't that bad. Oh and I used a Porter Cable random orbital buffer.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0185.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0186.jpg
After that, a nice coat of Meguiars NXT Gen wax/ polish. Again, short on time as I normally do two coats. I really wanted to try out the No. 7 Glaze, but no time and I didn't have another clean sponge bonnet. The Mothers Back to Black will be worked on tomorrow.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0187.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0190.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0193.jpg
Finally, a mirror shot....
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0188.jpg
First and foremost for a stress free and easy clean up.....tape the car! By the way, you can use normal 3M painters tape, but on the rubber gaskets, use the low adhesive 3M painters tape. For some reason, there is a little residue left behind.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0174.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0175.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0178.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0179.jpg
Then I ran over it with Meguiars M80 paint cleaner. I typically use a clay bar prior to this, but I was tight on time and the B9 wasn't that bad. Oh and I used a Porter Cable random orbital buffer.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0185.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0186.jpg
After that, a nice coat of Meguiars NXT Gen wax/ polish. Again, short on time as I normally do two coats. I really wanted to try out the No. 7 Glaze, but no time and I didn't have another clean sponge bonnet. The Mothers Back to Black will be worked on tomorrow.
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0187.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0190.jpg
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0193.jpg
Finally, a mirror shot....
http://i288.photobucket.com/albums/ll177/jmark42/IMG_0188.jpg